Skip to main content

ESD High Temperature Resin

A photopolymer that prevents static charge build-up on parts in operating conditions up to 284 °C. Electrostatic Discharge (ESD) of small voltages is enough to destroy sensitive electrical components or ignite flammable vapor. Parts made from Fortify’s ESD-HT photopolymer are “static dissipative”, allowing for controlled static discharge with precisely tuned resistivities of 106 Ω/sq.

Key Material Properties:

  • Surface Resistivity: 106 Ω/sq
  • Heat Deflection Temperature (@ 0.455 MPa): 284 °C
ESD High-Temperature Resin for 3D printing

Thermally Conductive Dielectric Resin

This material is designed for thermal management applications that require electrical insulation. With a thermal conductivity of up to 2W/mK, TCDR has 10x the conductivity of any other photopolymer while maintaining impressive dielectric strengths over 27 kV/mm.

Key Material Properties:

  • Thermal Conductivity: 2 W/m⋅K
  • Electrical Resistivity: 10^16 Ω·cm
Data Sheet
Thermally Conductive Dielectric Resin for 3D printing

Standard Materials

Fortify is currently qualifying a range of popular Open Source materials for use on Fortify 3D printers. If there is a particular resin you are interested in, please let us know.

Talk to an Expert