Rapid + TCT 2022

Huntington Place 1 Washington Blvd, Detroit, MI

Fortify will be exhibiting at Rapid + TCT 2022 at Booth #1133.  Set up a Meeting Speaking Session: Speaker: Philip Lambert (Lead Customer Solutions Engineer, Fortify), Trevor Polidore (New Product Development Group Leader, Rogers Corporation) Presentation Title: Fiber Filled Photopolymers - How We Developed a 3D Printable Dielectric Polymer for Radio Frequency Applications Date: Tuesday May […]

Injection Molding & Design Expo 2022

Huntington Place 1 Washington Blvd, Detroit, MI

Fortify will be exhibiting at Injection Molding & Design Expo 2022. Exhibitor: Booth #240 The Injection Molding and Design expo is an exciting new free-to-attend tradeshow from the people behind Plastics News and Injection World magazines. Focused exclusively on injection molding, the two-day event brings together the complete North American supply chain, from part and mold design, through process optimization […]

WEBINAR: HTS – Additive Manufacturing’s PEEK and Torlon Replacement

Speaker: Craig Crossley, Injection Mold Tooling Application Engineer Presentation Title: HTS - Additive Manufacturing’s PEEK and Torlon Replacement Overview While many 3D printed photopolymers are great for applications where commodity, or even engineering grade plastics, are needed, the industry lacks high throughput solutions (such as SLA/DLP) that can produce parts that match the characteristics of […]

IMS 2022

Fortify will be exhibiting at IMS 2022 at Booth #2039. Register for a free expo pass Set up a Meeting  

WEBINAR: Molding in Engineering and High Performance Resins with 3D Printed Mold Tools

A common misconception with 3D printed mold tooling is that you can only mold in commodity-level plastics like polypropylene. This is okay in many instances because you may only need a prototype for form and fit but oftentimes organizations need a prototype in their end-use material. This is next to impossible with most 3D printed […]

IEEE AP-S/URSI 2022

Hyatt Regency and Grand Hyatt Denver, CO

Fortify will be exhibiting at 2022 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting at booth #113.  Set up a Meeting Speaking Session 1: Speaker: Philip Lambert (Lead Customer Solutions Engineer, Fortify), Scott Rudolph (Electrical Engineer, Naval Research Laboratory) Presentation Title: Evaluation of Joining Techniques for Disparate 3D Printed Effective Media for […]

WEBINAR: Can 3D Printing Solve Your ESD Manufacturing Challenges?

This webinar will review the intersection of additive manufacturing and ESD. A current review of 3D printed ESD materials will be explored, in addition to the unique printing and processing capabilities that allow Fortify’s printers and materials to meet the requirements of electronics manufacturers.

Small Satellite Conference

Utah State University Logan, UT

The Fortify team will be attending the SmallSat Conference Aug 6-11. Set up a Meeting  

Ceramics Expo 2022

Huntington Convention Center 300 Lakeside Ave E, Cleveland, OH

Fortify will be exhibiting at Ceramics Expo 2022 at booth #319. Set up a Meeting  

IMTS 2022

McCormick Place 2301 S. Lakeshore Drive

Fortify will be exhibiting at IMTS 2022 at booth #433114.  Set up a Meeting