Skip to main content

HTS: High Temperature & Strength Photopolymer

HTS delivers material properties similar to engineering plastics like PEEK, Vespel®, Radel® and Torlon® via additive manufacturing.  Unlike many other high-performance photopolymers, HTS is a one pot system leading to higher productivity and less waste.

Key Material Properties:

  • HDT: >300 C
  • Ultimate Tensile Strength: 90 MPa in Z
EUP and fixtures in HTS

Digital Tooling Photopolymer

High strength, HDT, and stiff ceramic-fiber reinforced photopolymer tuned for use in tooling applications such as injection molding or thermoforming. Exhibiting an HDT greater than 300 degrees °C, this material can withstand shots of aggressive plastics such as polycarbonate or ULTEM.

Key Material Properties:

  • Heat Deflection Temperature (@ 0.455 MPa): > 300 °C
  • Tensile Strength: 90 MPa
Photopolymer for tooling applications

Standard Materials

Fortify is currently qualifying a range of popular Open Source materials for use on Fortify 3D printers. If there is a particular resin you are interested in, please let us know.

Talk to an Expert